PL-3201
Dip Coating Equipment
Dip Coating Equipment
SCS
PL-3201
Dip Coating System
for Higher Performance and More Functionality
Overview
The ideal choice for lab and short-run operations!
The SCS PL-3201 Table-top Dip Coater has all the features found in our P-3201 Dip Coater, plus a number of optional features that bring added performance and functionality to the process of dip coating. This tabletop unit features a 14″ x 18″ coating tank and offers the same level of precision and reliability found with our SCS floor unit. The SCS PL-3201 gives you the ability to coat printed circuit boards with urethane, epoxy, silicone and acrylic coatings, as well as photoresists and solder mask materials, all with a high level of efficiency. This compact unit also incorporates an air-over-oil cylinder mechanism to safely move circuit assemblies in and out of the coating solution.
Features & Benefits
- Powered by compressed air cylinder for smooth, explosion-proof operation
- Adjustable immerse and lift speeds, 1-24 inches/minute
- Dip assembly supports multiple boards per dip cycle
- Removable tank for fast, easy coating changes
- Independently adjustable immersion and withdrawal rates
- Stainless steel tank cover minimizes vapor loss
- Accurate immersion control eliminates masking above dip line
- Meets National Fire Class1, Group D explosion-proof standards for Division 1 environment
Technical Specifications
| Unit Size (W x D x H) | 28.5 x 21 x 37 in / 72.4 x 53.3 x 94 cm |
|---|---|
| Tank Size (L x W x D) | 18 x 4 x 14 in / 45.72 x 10.16 x 35.56 cm Additional tank sizes available upon request. |
| Tank Drain | 1/2 NPT |
| Immersion Capacity | Up to 8 in (20.3 cm), with 6 in (15.2 cm) freeboard |
| Immersion Rate | 1 to 24 in/min / 2.54 to 61 cm/min |
| Withdrawal Rate | 1 to 24 in/min / 2.54 to 61 cm/min |
| Dip Depth | Adjustable by sensor position |
| Actuation | Compressed air at 15 CFM / 80 psi (25.5 m3/hr/5.5 bars), oil and moisture free |
| Exhaust | 200 CFM (340 m3/hr) |
| Optional Features/Accessories | Circulation pump and overflow dam Stainless steel piping for circulation pump in lieu of brass piping Coating filter Tank air blanket and flow meter PTFE coated tank Dip dwell (0-30 seconds or 0-3 minutes) |
All or some of the specifications and features noted on this page may be optional. All necessary details in this regard may not be specified on this page. Please contact us for full details. / Product design, appeareance, functionality, features and specifications are subject to change without notice.
Specialty Coating Systems Inc.
Dip Coating Equipment
Dip Coating System
RotaLab
Contact Us
+90 (212) 696 0406 | info@rotalab.com