Longer

L100-1S-2

Flow Rate

Peristaltic Pump

- Up to 8 Channels

Video

Overview

Flow rate type standard peristaltic pump for laboratory and light industrial applications

L100-1S-2 is a multi-channel peristaltic pump that can be used with various pump heads and tubings of different sizes. L100-1S-2 can reach up to 500 mL/min with single channel operation and up to 600 mL/min with multi-channel operation. System can be controlled through built-in control panel, external signal interface and communication interface.

Features & Benefits

Speed control mode and flow rate mode
Manual usage through built-in control panel
Control through external signal interface
Control through communication interface (RS485)
Memory function for automated storage of running parameters
Timer function for setting running time (pump runs/stops automatically)
Calibration function for higher accuracy
Intelligent fan control - lower noise level and better energy efficiency
Clockwise (CW) and Counter-clockwise (CCW) operation
LCD display
User-friendly membrane keypad
Prime key for fast filling and emptying
Keypad lock to avoid misoperation

Technical Specifications

Speed	0.01-100 RPM, CW/CCW
Speed Resolution	0.01 RPM resolution within the speed of 0.01-10 RPM 0.1 RPM resolution within the speed of 10-100 RPM
Maximum Number of Channels	8
Display	LCD
Control Mode	Control panel, External signal control, Communication control
Work Mode	Speed control mode and Flow rate mode
Flow Rate Mode	Flow rate is displayed and the pump runs continuously at the set flow rate
Flow Rate Calibration	Improve the flow rate accuracy
Flow Rate Setting Range	0.01 μL/min - 999 L/min, unit could be set as μL/min, mL/min or L/min
External Control	Start/stop control (switch signal), direction (switch signal), speed control (4-20 mA, 0-5 V, 0-10 V, 0-10 kHz are optional with uniform interface, from 0.01-10 RPM in 0.01 RPM resolution, from 10-100 RPM in 0.1 RPM resolution)
Communication Control	RS485 interface, Longer protocol or Modbus protocol, the communication parameters (address, baud rate, parity, stop bit) can be set through keypad
Timing Function	Set the running time (0-30 min), the pump could run/stop automatically
Parameter Memory	Operating parameters will be saved automatically
Status When Powered Up	The pump status when powered up could be set as stop or as the status before power loss
Prime	For fast filling and emptying at full speed
Keypad Lock Function	Keypad can be locked to prevent the misoperation. The delay time before lock is settable
Dimensions (L x W x H)	232 mm x 142 mm x 149 mm
Power Supply	AC 100V-240V/20W, 50/60Hz
Operating Temperature	0-40°C
Relative Humidity	‹80%
IP Rating	IP31
Weight	2.38 kg

All or some of the specifications and features noted on this page may be optional. All necessary details in this regard may not be specified on this page. Please contact us for full details. / Product design, appeareance, functionality, features and specifications are subject to change without notice.